噴砂（丸）房系列表產品設備

船只逐段噴漆工藝房-運輸船只特涂設施設備

Ship section coating room-special ship coating equipment

1、一個強硬性涂裝工藝建筑規范性；作用是保護區淺海工作環境；一天、分次治理Sa2.5級；有一種確認涂覆指標選用壽命15年工程作業水平。

2、（角處園角）2mm；涂膜毀掉不超2%或25m2,噴砂除理Sa2.5級。

3、（粗糙，度）30-75um；表皮熱度比露點高3℃；干膜體積尺寸320um。

4、（顆粒劑的大小）3、4、5塵土生長1級；人眼可看得出更小粉塵洗去。

5、（氯化鈉）50mg/m2；500總噸船用井水艙；150m長散貨船雙舷側。

6、噴漆工藝技術應用規格尺寸書6學習環境要素：產品的稱謂、耐磨涂層村料、進行施工做法、膜厚區域、前處理、學習環境。

7、70%Sa2級（經過多次實驗發現各種格底漆）；合適底漆掃砂或高壓變壓器水的洗滌。

8、（比較相對濕度）小于等于85%。

9、90/10規則：90%高于標準化值，10%做到基準值的90%。

1.A mandatory coating construction standard; Purpose is to protect the Marine environment; Once, twice Sa2.5 processing level; A kind of guarantee coating goal service life 15 years construction technology.

2.(the edge horn) 2 mm; Coating damage is more than 2% or 25 m2, sandblasting processing Sa2.5 level.

3.(roughness) 30 75 um; The surface temperature than dew point 3 ℃ high; Dry film thickness 320 um.

4.(particle size) 3, 4, and 5 dust distribution grade 1; Visible to the naked eye more little dust removal.

5.(sodium chloride) 50 mg/m2; 500 gross tons special water tank ship; 150 m long bulk carrier double side to side.

6.coating technology specification 6 elements: product name, coating materials, construction method, film thickness range, pretreatment, the environment.

7.70% Sa2 level (experiment unqualified primer); Qualified primer and sand or high pressure water cleaning.

8.(relative humidity) less than 85%.

9.90/10 rule: 90% to 10% of the value standard of 90%.

會根據標準規范，自己的業務就會有等等：

1、我們公司能能而言僅有噴涂工藝房不一段能需要滿足PSPC技術規范起來，還不能涂料房更都能能考慮技術規范起來；那么還不能涂料房的企業都能能幫住設計，有涂料房的企業都能能幫住全面。

2、15年實用使用時間的規則，將會對以外的別的制造行業有吸取經驗效用。

3、情況各位會保持無弄臟。

4、Sa2.5級象征著科學規范噴砂和再利用平臺的操作和改善。

5、干硬度管控含意著磨料磨具分割裝置設備的標準要求上升了（儲存細顆粒，我們要除灰塵）。

6、溫、室內溫度、強度探測機器設備操作率很大程度上提升。

7、海水鹽度、清洗度、臟污探測很大采辦。

8、單單從表面除塵機器設備（自動、氣動平衡、防震）過多實用。

9、涂料房燈飾設備能夠所需可以改善，考慮燈具開關、設計的布置教室、怎么安裝土建工程。

10、為絕對生態環境局限的條件：合理有效的除塵操作系統軟件軟件操作系統軟件軟件、節能公司的熱處理加熱操作系統軟件軟件、不靠譜的祛濕操作系統軟件軟件變為噴涂使用都要專用設備。

According to the standard requirement, our service opportunities have these:

1.We can think only painting room can not meet the PSPC standard, no more can't satisfy the standard coating room; So there is no painting room we can help construction, painting the room we can help improve.

2.15 years of service life standard for other industries, may be a reference for.

3. we can do no pollution environment.

4.Sa2.5 level means efficient sandblasting and recovery system and improve the use of.

5.Roughness control means abrasive separation device demand rose (save fine particles, remove dust).

6.Temperature, humidity, thickness testing instrument utilization rate is greatly increased.

7.And salinity, cleanness and dust detection in large quantities.

8.surface aspiration equipment (electrical, pneumatic, explosion-proof) used in large amounts.

9.Painting room lighting facilities may need to improve, choose lamps and lanterns, design installation, construction.

10.To ensure the environmental restrictions conditions: reasonable dust removal system, the energy saving of the heating system, reliable dehumidification system construction must be coating equipment.

對著油船修造相關行業IMO鍍層性能參數標準的(PSPC)的實施，斯特爾機械提供船舶噴砂涂裝設備系統整體解決方案及技術支持，為船舶修造行業設計制造完善的船舶分段噴砂房噴漆房，鋼板拋丸預處理線，舾裝件、艙口蓋等船體部件二次分段涂裝房，壓載艙特涂設備，連續高效噴砂設備及回砂系統設備，精準的砂塵分離裝置，環保節能型除塵設備，大中型真空吸砂設備，組合式除濕機，高效暖風機，移動防爆風機，電動/氣動平衡/防火型吸塵器環保專用機，超高壓水的洗滌環保專用機，室溫、相對濕度、壁厚檢查實驗儀器，含鹽量、清掃度、粉塵用檢查環保專用機。

Facing the ship building and industry IMO coating properties standard (PSPC), the implementation of the frost's mechanical professional ships provide gush arenaceous coating equipment system overall solutions and technical support, for ship building industry professional design manufacturing perfect ship segmentation gush arenaceous room spray-paint room, steel plate is shot pretreatment line, outfitting a, hatch cover parts such as secondary section hull coating room, water ballast tank with equipment, high efficiency, continuous sand blasting equipment and back, the fine sand system equipment sand dust separation device, environmental protection energy-saving dust removal equipment, large and medium-sized vacuum sand blasting equipment, assembled dehumidified machines, efficient warm air blower, mobile explosion-proof electric fan, / pneumatic/explosion-proof type aspiration equipment, high pressure water cleaning equipment, temperature, humidity, thickness testing instrument, salinity, cleanliness, dust special test equipment.