Q32一系列履帶拋丸處理機

◆物料共同點 Product features

本輪式拋丸機廠家適當多品類，大中批處理產量類件產品的面除銹設備或拋丸升級，清除垃圾類件產品務必是不是怕沖撞的單重在150kg低于的鑄件及加熱件，機用戶既可電腦單機運行，又可配線運行. 歸屬于制作機械設備依據。

自主：將部件放進膠履帶滾筒機中，作業者按著“行駛”圖標，拋丸室門氣動系統倒閉，拋丸去除逐漸開始，履帶向上行駛，部件不斷的地對其進行翻滾，強效拋丸器將拋丸快速拋射入正處于翻滾的部件外觀上，部件可是均勻的地擁有去除。鋼丸采用履喊上的溜孔流進去雙螺旋傳送機，再將鋼丸傳送往斗式升級機，經斗式升級機升級到分離處理器，被分離處理后隨意調節待會兒用。拋丸終止后，拋丸室門自主取消，履帶翻轉，將部件卸出。

手工：機械是運用速度換向的風扇葉片將彈丸拋向履帶內連續不斷反轉的鑄件上，然后可達清除垃圾鑄件的最終目的。它采用到各家業中的不同規格的中小型鑄件、鍛件、壓鑄件、齒軸、拉簧等件的清砂、去銹、去氧化反應皮和外層武器鍛造。該機是整合在中國外新技術，設計的概念開發設計的新車輛，有的是種清除垃圾的效率好、架構緊身、燥聲小、整套性好的清除垃圾裝備。

This machine is suitable for various  large and medium-sized batch production of workpiece surface derusting or peen-forming strengthening, clean up the work-piece must be not afraid of the collision of the single is is 150 kg of the casting and heat treatment, the machine can not only a single use, and wiring use. Belong to casting machinery.

Automatic: the workpiece in rubber crawler roller, the operating personnel press "run" button,  shot room door close behind, pneumatic blast cleaning began to run forward, tracked, workpiece constantly, efficient and powerful shot peen-forming high-speed mixer trajectory to is back on the surface of workpiece, workpiece can completely evenly clear. Steel shot through the crawler sneak into the hole, then screw conveyor will be sent to the steel shot a hoist, a type of the hoist to ascend to the separator, separated by storage to use. Is shot ended, is shot room door open automatically, tracked reversal, discharged the workpiece.

Manual operation: This machine uses high-speed rotary projectile impeller will throw to turn over the workpiece in continuous caterpillar, so as to achieve the purpose of cleaning up the workpiece. It is used in the industries of small-sized castings, forgings, stamping, gear, springs, and a rust-removing, derusting, to oxide skin and surface strengthening. This machine is comprehensive technology, the development of domestic and foreign design new products, it is a kind of cleaning efficiency high, compact structure, the noise is small, systematic good cleaning equipment.

◆產品顯著特點 Product features

1.該機用到了懸臂抽濾式拋丸器，還具有施用平均壽命更長久和設備構造十分簡單等的特點。

2.利用BE型離心提取設備，包括更好的離心提取體驗和生產制造率，對提高自己樹葉有及時的功用。

3.利用袋式除塵設備器，粉塵爆炸排放出氧濃度不高于各國暫行規定的規范，大中國大地促進了操作步驟者的勞動力環境。

4.采取耐磨性能再生膠履帶，避免了對鑄件的碰撞檢測及影響事情，減少了工具的的噪音。

1. The machine adopts the cantilever centrifugal peen-forming device, with long service life and simple structure.

2. The BE separator has the good separation results and higher productivity, which has positive effec to the blade.

3. The bag filter, dust emission concentrations below the standards prescribed by the state, have greatly improved operator working environment.

4. The wear-resisting rubber crawler, less on the collision and damage, reduce the noise of the machines.

◆適用性空間 Applicable scope

      壓鑄件、精密模具模具鑄件、精密模具模具鍛件等的保養、光飾。清掉熱進行治理件、鑄件、鍛件的從表面硫化皮。拉簧的強化木紋地板。扭緊件除銹方法和前進行治理。

1、符合英國一百三三時代末的通過式拋丸機確定國產化手工制造。

2、按照直聯雙固拋丸器，傳播利用率好，拋丸量大。

3、風選提取器、丸砂提取率多于99%。

4、彈丸復蓋一致，無拋丸墻邊。

5、耐磨涂層件選擇蓄電量長，調換發展。

6、機低嗓聲運轉。

7、電力設備用于繼家電（或PLC）管理，管理柜、聲光報警提升裝置器報警提升裝置提升裝置，PC通過西門子系統名牌，重要原電子元器件通過西門子系統合資牌子名牌運行簡約、不靠譜。

Die casting, precision casting, precision forging of cleaning, light ornaments. Remove heat-treated pieces, castings, forgings surface oxide skin. The  strengthening of the spring. Fasteners derusting and former processing.

1. Reference to Germany at the end of the ninety’s shot used the machine manufacturing.

2. The efficient direct coupling strength is shot, transfer the high efficiency, is shot amount is large.

3. Efficient wind separator, pill isolating rate of more than 99% of sand.

4. Projectile enclothe even, without peen-forming blind angle.

5. Wear parts of long service life, change quickly.

6. Low noise operation.

7. Electrical use relay (or PLC) control, control cabinets, sound and light alarm device, PC using mitsubishi brand,mainly by Siemens brand original device operation is simple, reliable joint venture.

◆大部分技巧性能參數 Main technical parameters