H鋼管/鋼板材料拋丸處理機

◆設備機構 Product structure

遠程服務器最主要是由進行清潔室、房間氣流運送輥道與一進一出氣流運送輥道、拋丸器、彈丸巡環模式 ( 含升高機、分開器、縱橫交錯雙螺旋輸送帶器和供丸管道網 ) 、吹掃組織機構、降塵、電力設備調整等作用器件根據。

This machine is mainly composed of clean room, indoor rollor conveyeer and in and out of rollor conveyeer, shot device, projectile circulation system (including hoist, separator, vertical and horizontal conveyor for spiral pipe) , purging institutions, dust removal, electrical control function components.

◆服務的基本原理 Product principle

為重復給料的高用途重復高空作業進行清掃機，在進行清掃的環節 中由電氣成套掌控的可變氣門正時頻變頻調速的運輸輥道將金屬結構設計件或鋼坯、合金鋼送進進行清掃機室人體拋射區時，其渾身各面遭受到發源八臺與眾不同經緯度定位的拋丸器的強效密集度彈丸的嚴重打擊與擠壓，使其上的腐蝕銹層及污染十分迅速掉過來，鋼坯面層就賺取具有著一段變厚度的晶亮面層。落到鋼坯后面的彈丸與銹塵經回收進行清理旋螺運輸到彈丸循壞設計，在進行清掃室內兩端輥道工作部件。進行清掃的環節 中，撒留過來的丸塵混合式物經室體漏斗、縱覽向旋螺運輸機囊括于提高機下面，再提高到設計上側的拆分器里，拆分后的清爽彈丸落到拆分器喂料機中，供拋丸循壞使用的。拋丸進行清掃中會產生塵煙，由排風管送向降塵設計，凈化工程后進行清理后的凈氣廢氣到大方中；小粒狀塵煙，由排風管送向降塵設計，凈化工程后進行清理后的凈氣廢氣到大方中，小粒狀塵煙被抓捉采集而來。

Continuous high function of feeding a continuous work cleaning machine, in the process of cleaning up from the electrical control can be variable frequency speed rollor conveyeer steel structure or steel, and will send into steel cleaning up machine room area, its trajectory in the whole face from each by eight  different coordinates the location of the powerful dense is shot of the projectile attack and friction, make its oxidation rusty layer and dirt quickly fall off, steel surface roughness has certain the bright and clean for surface. Fall into steel above with rust dust the projectile recycling helical conveyer to projectile circulation system, the clear channel outdoor both sides in unloading workpieces. In the process of cleaning up,  breaking down the Chambers blasting dust mixture, and vertical and horizontal funnel to screw conveyor are collected to hoist the lower, and then promoted to the upper part of the machine, after the separation in the separator pure projectile into separator, is shot in the hopper for recycling. Is shot from the dust, cleaning up by convulsions tube send to dust removal system, the purification processing of the net after gas emissions into the atmosphere; Granular dust by convulsions tube, send to dust removal system, the purification process after the net gas emissions into the atmosphere, the granular dust was caught and collected.

H鋼材/不銹鋼鋼板拋丸清理垃圾機

◆ 廠品特殊性 Product features

不銹鋼板通過式拋丸機是一種種去除 H 鋼、矩形鋼、網架、鋼條的多模塊鋼才拋丸預整理設施設備。拋丸器布設結構為多弧度，建議選用了科學規范拋丸器，拋擠出快速路密布的彈丸束，影響在原有情況鋼件的其他地方實行制做的、全方向的保養，使鋼件各表皮上的脫漆層、焊渣、被氧化皮試述它污漬急劇滑落，兌換兼具相應模糊度的光滑整潔表皮，從而提升 了漆層與鋼才表皮的依附力，并從而提升 鋼件的抗困倦和抗腐化意識，緩和了鋼件底層質量管理，變長其利用使用時間。

Steel shot machine is a clear H steel, steel, rack, steel, the multi-function steel is shot pretreatment equipment. Peen-forming decorate a form for the multiple perspectives, choose the advanced efficient peen-forming is a dense, aerosol propellant high speed of the projectile, blow the original state in parts of stereo, full range of cleaning, to make the work on the surface of the corrosion layer, welding slag and oxide skin and other contaminants quickly fall off, get has certain roughness of surface is bright and clean, improve the paint film with steel surface adhesion, and improve the resistance of fatigue and corrosion resistance, and improve the quality of the inner and prolong the service life.

◆ 包括工藝性能指標 Main technical parameters