涂漆噴涂料噴砂驗測檢測設備系列產品

COATING SPRAY AND SPRAY SAND TESTING INSTRUMENT SERIES

變厚度在檢測儀 Roughness measuring instrument

※設定高大上，結構設計主體工程，區域經濟抗用。

※也可以于測量各個形狀圖片大全外表面的粗糙，度，還包括：平行面、外圓、內槽還有他較難精確測量的的表面。

※既可在藥廠車間當場運行，也采用作劑量室和實驗所室。

※感測器器可在原帶或轉出至90 °、180 °及270 °開始預估，可快速需要與眾不同現狀分析下的判斷需要。

※醫療儀器可在保持垂直恐怕顛倒的環境下做操作步驟。

※ Novel design, compact structure, economy and durability.

※ Can be used to test different shapes the roughness of the surface, including: plane, Cylindrical, inside edge and other

more difficult measurement of the surface.

※ It can be used not only in the workshop, but also in the measuring chamber and the laboratory.

※ The sensors can be measured built-in or turn out to 90°180°and 270 °to, it can be easily satisfy different condition

detection requirements.

※ The instrument can be  operated in vertical even inversion the condition.